Multiple monitors can help you be more productive. It can make your life easier. But of course, you have to use the right monitor arm, otherwise, it can interfere with your productivity.
How can you make the suitable choice?
We’re going to briefly rundown the factors that you should consider. We also have our personal favorites and we’ll let you in on why we chose them.
When choosing a triple monitor stand, make sure to consider the following factors:
– The weight and size of your monitors
– The material of the stand
– The mount type
– The max weight capacity
– Cable management system
– Tilt, swivel, rotate, and height adjustment options
– The length of the arms
How We Made our Choices
Our top picks include some of the more heavy-duty monitor arms that you can see on the market. These units can bear more load and can be paired with heavier and bigger screens.
We have also picked some of the more flexible ones.
Units with articulating arms can give you more range of motion. And we made sure that they are not only flexible, they are also easy to reposition and decently sturdy. So even if you need to change the position of your screens several times a day, it will still stay stable.
And we also have picked some units that are perfect for those with smaller space. Using a triple monitor arm in a small home office can be challenging, But we managed to pull out a gem. You’ll still be able to use this type of monitor arm despite a smaller space.
The Bestseller Triple Monitor Stands
- Compatibility: WALI Triple Monitor Stand fits most LCD, LED flat screen TVs and monitors up to 27 inches, and support weight up to 22lbs per arm. Mount plates detachable and height adjustable suit with VESA 75x75mm or 100x100mm.
- Multiple Options: Two-stage locking system Free Standing and 4” diameter Grommet-Base. Grommet-Base is suit with 0.3”-4” desk thickness. The free-standing V-Base can be placed on any desktop.
- Adjustable: Arms extend and retract with full height adjustable on 16” height pole, center monitor +/-15° tilt, side monitor +/-90° tilt and swivel to change reading angles and 360° rotate from landscape to portrait mode.
- Fits 13" To 30" Screens - Triple monitor mount holds 3 computer monitors 13" to 30" in size and 22 lbs in weight (each) with VESA 75x75mm or 100x100mm mounting holes. Detachable cable clips are provided on the arms and center pole to keep your cords clean and organized.
- Articulation & Height Adjustment - Adjustable arms offer +15° to -15° tilt, 180° swivel, 360° rotation, and height adjustment along the center pole for optimal viewing angles. Monitors can be placed in portrait or landscape orientation.
- Heavy Duty Base - Measures 15.75" x 11" providing solid stability while monitors are held within its center of gravity. The bottom of the base features padding to protect your desk from scratches. Warning: Please do not pull monitor(s) too far forward or backward unless the stand is bolted down, as this will cause stability issues.
- Universal Compatibility: Triple monitor stand perfectly fits most flat or curved LCD computer screens up to 27", including but not limited to 27, 25, 24, 23, 22, 21.5, 21, 20, 19, 17 inches displays. Each arm supports a weight of 2.2-17.6 lbs, compatible with VESA patterns 75x75mm and 100x100mm. Fit for most tables with a thickness or hole diameter of 0.39"-3.15".
- Articulating Triple Monitor Mount: The fully adjustable monitor arms can tilt ±35°, swivel ±90°, and support rotation 360 degrees. The center screen can be height adjusted. The 2 gas spring arms make the extension, retraction, and height adjustment dynamically and easily. With multiple screen combinations, easily find an optimal viewing angle and position for comfortable work.
- Ultimate Desk Space Saver: The 3 monitor stand mount get displays off your desk conveniently, and the standing pole design helps you to gain a ton of extra space. Integrated cable management to keep cables tucked in arm neatly, hide the sore eyes wire clutter. Just enjoy your working, gaming, or viewing hours in a comfortable environment.
- 【 EXTRA LARGE FOR 1-2-3 MONITORS 】🍒Free Reissue if Broken in transportation( >.< contact brand seller) 🍒The size of monitor stand was improved to offer enough space for using 1-2-3 monitors together. The length of triple monitor stand can be changed from 29.14" to 50.6",Put together will help you organize and make your work more efficient!
- 【 FREELY ADJUST LENGTH AND ANGLE 】Extra large monitor stand can be offered a max size for 3 monitors,also it can be folded to a min size for 1 large monitor. Two side of triple monitor stand can be adjusted +/-90°angle.YOU CAN FREELY arrange your devices even if your desk is irregular, such as dual monitor, laptop, tablet, lamp, phone, speaker, etc.
- 【 EXTRA STORAGE SPACE 】 It comes with 3 shelves which can be used as a desk shelf with storage for your keyboard, office files, notebook, calculator etc. Helps make your table clean & neat! PLUS we lengthen Middle Board to 22.84” ,suitable for all keyboard.
- 3 Screen Display - Save valuable desk space and increase productivity by elevating 3 monitors for triple-screen viewing. Fits most monitors up to 24" in size and 15.4 lbs (per screen) in weight with VESA 75x75mm or 100x100mm mounting holes.
- Articulation & Height Adjustment - Mount offers +45° to -45° tilt, 180° swivel, and 360° rotation for comfortable viewing angles, and the arms are height adjustable along the center pole. Power cords can be routed through the provided cable clips to keep wires clean and organized.
- Sturdy C-clamp Mounting - The heavy-duty C-clamp attaches to desktops up to 3.25” in thickness with simple hand-tightening, and an optional grommet mount is included. Both mounting options hold your triple-screen setup safe and secure, and protective padding keeps your desktop free of scratches.
- Compatibility: Fits most flat panel monitor up to 27” and supports weight up to 22lbs per arm. Mount plates detachable and height adjustable applicable to mounting holes 75x75mm and 100x100mm.
- Multiple Options: Two-stage locking system C-Clamp and 4” diameter Grommet-Base, both systems are applicable to 4” thick desk.
- Multiple Adjustment: The high-grade arms extend and retract, +/-15° tilt and +/-90° swivel to change reading angles, and 360° rotate from landscape to portrait mode.
- Fit for Your Monitors - Each monitor arm can only accommodate a maximum size of 32 inches. Monitors larger than 32 inches are not compatible. And the monitor must have VESA mounting holes of either 75x75mm or 100x100mm. The weight range of the screen must be from 4.4 lbs to 17.6 lbs. We recommend that you carefully verify this information before making a purchase.
- Super Space Saver - Conveniently frees up more valuable work space by elevating 3 monitors off of your desk, making your workstation spacious and clutter-free.
- Customized For Optimal View - The gas spring arms allow easy to adjust monitors swivel, tilt and rotate to find an optimal view angle and position for comfortable work. Freely set your monitors to landscape or portrait mode!
- Triple Monitor Stand: The computer stand can accommodate 2-3 monitors, which is an ideal choice when you need multiple computers to work together. And it works on both laptops and desktops. With a maximum weight of 44 pounds, you don't have to worry about collapsing or shaking during use.
- Adjustable Length & Angle: The monitor stand riser length can be adjusted from 31.3 inches to 52.9 inches, and the angle can be adjusted +/-90 degrees, you can change the length and angle of your visual as you like. Helping you organize the desk reasonably, and find the most comfortable posture during long-time work, ease your neck and back.
- Extra Space for Keyboard: It comes with 3 shelves and we especially lengthened the middle board to 21.5" to suit most kinds of keyboards, also it can be used as a desk shelf with storage for your office files, notebook, calculator, etc. Helps make your table clean & neat!
- Universal Compatibility: Triple monitor stands perfectly fit most flat or curved computer displays up to 27", including but not limited to 27, 25, 24, 23, 22, 21.5, 21, 20, 19, 17 inches display. Each arm supports a weight of 4.4-19.8 lbs, compatible with VESA patterns 75x75mm and 100x100mm. Fit for most tables with a thickness of 0.39''-1.97'' or a hole diameter of 0.39"-3.15".
- Articulating Triple Monitor Mount: The fully adjustable monitor arms can tilt ±90°, swivel ±90°, and support rotation 360 degrees. The Center screen can be height adjusted, 2 gas spring arms make the extension, retraction, and height adjustment dynamically and easily. With multiple screen combinations, easily find an optimal viewing angle and position for comfortable work.
- Desk Space Saver: The 3 monitor stand mount get displays off your desk conveniently, and the standing pole design helps you to gain a ton of extra space. Integrated cable management to keep cables tucked in arm neatly, hide the sore eyes wire clutter. Just enjoy your working, gaming, or viewing hours in a comfortable environment.
- Compatibility: Fits LCD, LED flat screen TV and monitor up to 27". Support up to 15.4 lbs. Mounting Holes applicable 75 x 75mm or 100 x 100 mm. Two stage locking system is applicable to 3.3” c-clamp and 3.1” grommet base.
- Fully Adjustable: The gas spring stand can tilt +45°/-45°, swivel +90°/-90°, and rotate 360°，Max height is up to 17.1", and max extension is up to 27.2".
- Double Benefits: Double efficiency and productivity to make working or relaxing that much more comfortable.
The 7 Best Triple Monitor Stands
Here are our top choices for monitor arms for a busy setup.
| Triple Monitor Stand | Required desktop thickness | Weight capacity (each arm) | Tilt angle in degrees | Supported screen size |
| Mount-It | 4” | 15.4 lbs | -15, +15 | 24”-32” |
| Ergotech | 3” | 25 lbs | -10, +20 | 16”-27” |
| VIVO | 3.35” | 22 lbs | -90, +90 | 13”-24” |
| Huanuo | 2.36” | 17.6 lbs | -90, +85 | 17”-32” |
| TechOrbit | 3” | 15 lbs | -90,+90 | 13”-30” |
| WALI | 2-3” | 22 lbs | -15, +15 | 13”-27” |
| Stand Steady | 3.3” | 17.6 lbs | -45, +45 | 13” – 32” |
Mount it! Triple Monitor Stand
This monitor arm is perhaps one of the more fluid yet affordable arms we have come across.
The way it was built allows you to make micro-movements with your monitors throughout the day. If you tend to reposition your screens from time to time, you will need this one.
It’s not hard to adjust, and you can adjust each arm independently. You can also easily change the orientation of each screen according to your needs and preference.
It’s not the most heavy-duty item on the list, but it can accommodate monitors from 24″ up to 32 “max.
That said, it can somehow lose a bit of the fluid movement if you use heavy monitors. So we see this unit working best for lighter monitors. Not maximizing the weight capacity of each arm will allow you to use the unit more freely. Once it’s loaded to the max, it can lose some flexibility.
This can be drilled into desktops that are up to 4″ wide. The package already comes with an interchangeable C clamp and base mounts.
It also comes with a USB 3.0 port and audio port and matching extension cables for each. That makes it an attractive choice for those, even if it’s best paired with lighter monitors.
It also has an integrated cable management system, so organizing your wires and cables will be pretty straightforward.
We were pretty satisfied with the build of this product.
However, we could not adjust the middle monitor’s depth. With that limitation, we see it best suitable for a 24″ desk. If you get a deeper desk, the central monitor might become too far away from your reach. That’s one thing to consider if you own a deeper desk or if you plan to change it shortly. You might need to purchase a different brand with all three arms going deep enough.
VIVO Triple Monitor Stand
This is another company that has been making a name in the dual and triple monitor world.
The VIVO stand is made of high-grade steel and aluminum. It can accommodate screens from 13″ to 24″. The max weight capacity for each monitor is 22 lbs.
Like the Mount-It! product, it also comes with a C clamp mount as well as a grommet base mount. Both of these make sure that your monitors are stable and will not wobble even if you make micro-movements throughout the day.
It also comes with an integrated cable management system so you can organize your cords and cables neatly. We like that this company always includes this because we believe it’s one of the most important features when it comes to monitor stands. A cluttered desk is an eyesore and a distraction.
This stand can also be tilted, swiveled, rotated, and height-adjusted. So you can pretty much position your monitors however you want.
The one thing we did not like about this product is that the arms are not as long as we would like them to be. If you have a deep desk, the central monitor might be too far away for you to reach. That’s something to consider before purchasing this product.
Huanuo Triple Monitor Stand
This company has been making a name for itself in the world of computer accessories. And it’s no surprise because their products are high-quality yet affordable.
The Huanuo triple monitor stand is made of heavy-duty steel and can accommodate monitors up to 27″. The max weight capacity for each monitor is 17.6 lbs.
It comes with a C-clamp mount as well as a grommet base mount. Both of these make sure that your monitors are stable and will not wobble even if you make micro-movements throughout the day.
It also has an integrated cable management system so you can organize your cords and cables neatly. We like that this company always includes this because we believe it’s one of the most important features when it comes to triple monitor stands. A cluttered desk is an eyesore and a distraction.
This stand can also be tilted, swiveled, rotated, and height-adjusted. So you can pretty much position your monitors however you want.
The one thing we did not like about this product is that the arms are not as long as we would like them to be. If you have a deep desk, the central monitor might be too far away for you to reach. That’s something to consider before purchasing this product.
Ergotech Triple Monitor Stand
This monitor arm is one of the more heavy-duty units on our list. It is very hefty and weighty. And it can support screens up to 25 lbs each. But without articulating arms, you can only place a monitor with a max size of 27″. But you can tell that every part of this product is durable and heavy duty.
It also offers a lifetime warranty. So if you are looking for one that can last for a while, this will not disappoint you.
Since it doesn’t have any articulating arm, this is best for those who need all three screens to be in the same position. It is ideal if you work on several screens and need everything to be spread out right in front of you.
Another selling point of this unit is that it is expandable. You need to add a few more parts, and you can transform it into a six-arm monitor stand.
This bad boy will stay put, and all the three screens will hold themselves pretty well. It will not sag or bend even if you have maximized the load capacity. The base is solid and sturdy.
But it comes with more accountability. The base plate can scratch your desk, so you better put something under it to protect the table’s surface.
Take note that even if it has telescoping wings that may enhance the flexibility of the arms, you’re still limited when it comes to the adjustment range.
You may also find it challenging to adjust. It’s not easy to change the height of the stand. Also, you have to allot time to set this up. It may take a while.
TechOrbit Triple Monitor Stand
It is highly recommended if you need a unit with articulating arms with a small footprint. TechOrbit is relatively compact, and you can use it sans a small space.
It also has a lot of vertical height, so you’ll most likely be able to reposition your screens in numerous ways. It is very flexible, so you’ll not have a hard time changing the orientation of the monitors from time to time.
The design is very interesting and unique at the same time. You can have more flexibility for a monitor arm that does not require much space, like a unit that requires a larger footprint. There’s plenty of room for adjustment, yet you don’t need a lot of room.
The downside is that it’s not the most heavy-duty. The weight capacity of each arm is only 15 lbs. Overall, It will work best for lighter monitors
WALI Triple Monitor Stand
It is our top choice if you need stacking triple arm monitors. One of the arms is placed on top of the two screens.
So this works best if you need the third monitor to be stationary at all times and maybe use it as a supplementary screen. This design ensures that you focus more on the two screens at eye level.
This unit is also quite sturdy and stable. It will not sag nor bend.
The downside is that there are limitations on the range of movement. Since it has a stacked design, you will not be able to change the orientation of the top monitor compared to those units with articulating arms.
Also, you have to ensure that your desk is robust enough to stand the weight. It can be a really hefty unit. Something from IKEA might be unable to accommodate this monitor arm’s weight.
Stand Steady Triple Monitor Stand
Like WALI, this has a stacked design. And it’s our second best option in this category. You can pair it with screens as large as 32″, which is also one of this unit’s most significant selling points.
Like the WALI, a monitor arm with this design may have limitations in the range of movement. But this type of monitor arm will be more steady and stable than those with articulating arms. The design is simple yet intuitive and very sturdy.
Gamers can also use it. You can use the two monitors that are side by side for gaming while dedicating the third screen to keep tabs on the game’s stats.
It also comes with a cable management system, so you’ll find it easier to make an organized setup like the WALI.
Conclusion
Finding the best triple monitor stand for your needs can be a challenge. But we hope that our list has made it easier for you to choose the perfect one for your office setup.
